In-Tank Fuel Pump Module


Category: Fuel Pump

Type: Fuel Pump

Vendor: Tanks Inc


Pin It

This kit gives you everything that you need to install an internal fuel pump into nearly any tank. The PA Series fuel pump kit features a reservoir tray that eliminates fuel pump starvation that is common on non-baffled tanks.  A properly installed internal fuel pump will essentially eliminate any issues that are common on external fuel pumps such as vapor lock and cavitation.    

The pumps listed are capable of running up to 100 PSI and they will deliver a varying amount of fuel (gallons per hour) depending on the pressure. We have recorded the GPH at 30, 40, and 60 PSI as a guide to finding the correct pump for your particular installation. In addition, you can use the following list as a general rule of thumb for some of the more common engine swaps.

  • You assemble to the depth of your tank and install
  • All Metal Components are Heavy Gauge (Yellow Zinc Plated Steel)
  • Reservoir Tray Included
  • 1/4" NPT Supply Line
  • 1/4" NPT Return Line
  • 1/4" NPT Vent Opening
  • In-Tank Fuel Pump Wiring Harness
  • Up to 100 PSI Rating
  • Threaded Heavy Gauge In-Tank Mounting Ring
  • Heavy Gauge Mounting Plate
  • Adjustable Height Support Arm 
  • Genuine Walbro Fuel Pumps are supplied

Pump Flow Rates:

 PA-2  Deluxe 190 Liter Per Hour Pump                   

  • 54 GPH @ 40 PSI                                         
  • 50 GPH @ 50 PSI
  • 48 GPH @ 60 PSI

PA-4  High Flow 250 Liter Per Hour Pump

  • 68 GPH @ 40 PSI
  • 65 GPH @ 50 PSI
  • 62 GPH @ 60 PSI

PA-6  High Performance 400Liter Per Hour Pump (500 - 1000 Horsepower)

  • 106 GPH @ 40 PSI
  • 99   GPH @ 50 PSI
  • 91   GPH @ 60 PSI

NOTE: All Flow Rates Are At 13.5 Volts


 

Related Items